Label Vista 3.4.4	8/23/2007

Did/Fix 3.4.4
• Removed unnecessary parameter settings for Avalanche Network management (User name and Password)
• Fixed password parameter set and get for MSP Network management
• Fixed dependency on Baud Rate for USB type connection while sending firmware to update printer. 
• Fixed timeout to prevent Label Vista displaying "Application Download Failed" message on successful update.

Label Vista 3.4        12/15/2006

Did / Fix 3.4
· Added the ability to move figures on a label by using CTRL + keyboard arrows.
· Enlarged the text dialog box.
· Added X / Y coordinates to the text dialog box.
· Fixed an issue with undo reversing the order of text.
· Added ability to run multiple copies of Label Vista at once.
· Added Application and ROM version information to the Printer Status dialog box.

Did / Fix 3.3
· Added server name and IP address support for Avalanche Network management
· Added full support for WPA/EAP authentication methods
· Added DHCP request per session and timeout settings.
· Updated help file for: Bluetooth, Avalanche TCPDataTimeout, DHCP Request Timeout and 
   Request per Session.
· Removed TCPDataTimeout for Avalanche
· Added support for certificate or PAC file that may be password protected.

Did / Fix 3.2
· Fixed text for Set Printer Language so it displays correctly
· Disabled Set Printer Language if printer does not support it
· Added device.language support on PrinterStatus->General tab
· Added support for Network Management->Symbol MSP
· Allowed USB to perform Quick Network Setup and Encryption Setup

Did / Fix 3.1
· Fixed WPA with PEAP or TTLS
· Added 802.1x encryption
· Added PEAP and TTLS authentication
· Took out the 30 character limit on barcodes
· Added Parity, Data Bits, and Stop Bits to serial setup
· Added ability to change baud rate over USB 


Did / Fix 3.0
· Added USB
· Added Graphics conversion / editing
· Added WPA tab on network settings
· Fixed a problem when sending config.sys with send file then sending a different file
   and it gets stored as config.sys
· Updated Help with VPN and WPA
· Fixed sending files with no extension and getting an error name too long shortening to
   same name
· Added WPA tab on network settings
· Added Network Management
· Added License Agreement and password to VPN.
· Added ability to create the VPN Configuration file


Did / Fix 2.16
· Cleared password field on set focus for mirror & vpn dialog boxes
· Changed Send files dialog box to include flash file name
· Added a default 0f 10x10 to scabable text size

Did / Fix 2.15
· Added VPN support

Did / Fix 2.14
· Fixed reading of checksum of applications
· Changed the bluetooth authentication DEFAULT option to GENERATED

Did / Fix 2.13
· Bluetooth pin has a max of 4 characters should be 10
· Read files->Clone over network truncates file at 0 bytes
· Network encryption wizard displays encrypted keys in test box
· Network retries is too long 
· Ftp get doesn't prompt if file exists
· FTP: if a get is done then a send the file list does not get redisplayed
· Opening a non Label Vista file crashes program
· Fixed the display of rectangles
· Fixed a problem where viewing a file on a 128 bit encrypted network crashed the program
· Added "Are you Sure?" to Delete All Files

Did/Fx 2.12
· Added support for the following network parameters
	· Signal Strength
	· Radio Firmware Version
	· Remote Port
	· Remote Port Auto Connect
	· DHCP CID Type, Prefix, & Value
	· BOOTP
	· For SNMP: Set Community, Get Community and Create a MIB file
· Added Mirror
· Fixed Send All Files in Label

Did/Fix 2.11
· Changed maximum field length for SSID to 32
· Fixed App download and Update Printer
· Changed the following settings in Print dialog
	Top of form: 0 - 400 (nothing negative is allowed)
	Present at: 0 - 200
	Postfeed: 0 - 400
	Prefeed: 0 - 400
	Page width: 0 - 832

Did/Fix 2.10
· Changed Bluetooth authentication choices to OFF, DEFAULT or SETPIN
· Added a pin field to the Bluetooth dialog box
· Added a splash screen
· Updated the About dialog box
· Added SH3 Printer, Flash and RAM support
· Fixed spelling of extended text on text dialog box

New in Version 2.9 
· Added support for configuring bluetooth radios
· Added support for auto-detecting COM ports
· Made an option to disable auto-detecting COM ports 
· Added support for Kerberos, wlan.preamble, and wlan.auth_type
· Fixed problem with E3N and reporting the ESSID if the printer was not returning it (secure mode)
· Added support for device.friendly_name for both network and bluetooth	radios

New in Version 2.8 
· Added support for the QL network printers
· Added Quick Network Setup
· Added Encryption Setup wizard
· Added POP3 setup wizard
· Added FTP file transfer
· Added a network ping dialog box
· Added store to flash file system check box to send files
· Fixed how Code 128 handled capital letters and code C (WA123456)
· Added DeleteAllFiles to Read Files dialog box
· Made the delete key delete (actually cut)
· Added an OnMouseWheel function to fix the ruler when scrolling with the mouse wheel 
· Added Update Printer function under the printer menu
· Added PS2100P, Cameo2 Plus, Encore4 SE, QL300 to printer mechanism type
· Added an option to use crc16 checksums.

New in Version 2.7
· Fixed a problem with send file

New in Version 2.6
· Added TCPIP Network printing
· Added LPD network printing
· Fixed Application Download

New in version 2.5
· Added YYDDD format in advanced text
· Added the Comtec LTD address on the About screen

New in 2.4
· Added Battery voltage, presentation sensor, and temperature to advanced text.
· Added the option when making cpf files to copy the bitmap at 0xa2 (cent sign) to 0x7f.
· Added option to automatically save label file after print.
· Fixed a problem with print preview.
· Added support for 115200 baudrate.

New in Version 2.3
· Added ability to directly use True Type Fonts in text blocks
· Added support for parallel printing
· Added support for the count command with barcodes and text blocks
· Added ability to download to printer all files associated with label 
  file (.CPF, .CSF & .PCX)
· Added Postnet and FIM barcodes
· Support for barcodes F39, 39C and F39C and others
· Added Send as FF.BAT
· Fixed problem with present at and printer shutting off before delay expired
· Added a Make Font button on the text dialog that automatically converts
  a TTF font to a CPF
· Fixed bug with typing in file name in send file then hitting enter losing the name
· Allowed Resident fonts to be viewed in the special text box
· Keyed off country code to show the resident international fonts in the special text box
· Changed the name of the special text button to Extended Text
· Improved the help file.
· Fixed print preview in the font creation dialog
· Fixed problem with lines of thickness of five or greater
· MCR dialog box retained original com port, fixed so the com port
  can be changed.
· Added printing of system parameters like page, time, date, tone ...
· Fixed how picture files are opened

New in 2.2
· Fixed problem with rectangles being clipped at the left edge.
· Fixed font naming for single digit point sizes

New in 2.1
· Added support for multi-line text
· Add Magnetic Card Reader Option
· Add ability to skip unrecognized commands.
· Add support for the country command
· Added Send as Run.bat
· Added ability to resize boxes and lines with mouse
· Added ability to select multiple items by dragging a box around them
· Added ability to scroll the screen when dragging items below bottom or top of screen
· Added support for 38400 and 57600 baud rates
· Fixed sending of config.sys files to the printer
· Added support for printers that need to keep the dtr line high such as the Denso application
· Changed print speed field in the print dialog to remember the last setting
· In Text box convert tabs to spaces
· Fixed so if you click on a .lbl file from explorer LV remembers the directory.
· Changed wording of Download File, ..., to Send File, ...
· Fixed saving of negative prefeed and postfeed values
· Changed Label Vista to remember the startup directory
· Re-laid out the print dialog box
· In read printer files made viewable files editable.
· Change startup to remember last size and position and restore those settings on power up.
· multiline spacing changing after copy/paste
· Fixed a problem with vertical lines positions moving
· update printer types in settings dialog to include Cameo
· Used original name for save name in font view
· Change the naming convention in fonts
· Added message if file is read only when trying to save
· Fixed a problem with compressed graphics and escapement of 180
· rotated text got drawn way out of selection rectangle
· Add support for the WAIT command
· Fixed special char inserted at beginning or middle of line
· Fixed with Label Vista crashing when looking for a cpf file that had been deleted
· Fixed the display of barcodes under zoom of 50%, 75%, and 150%
· Fixed a comms problem when sending large files

New in version 2.0
· Improved font alignment between the screen and the printer
· Fixed a problem with small fonts printing wavey
· Fixed the Save As Format file option
· Fixed crash with cpf files with bad character references
· Fixed a problem with inverse rectangle skewing text inside to the left
· Fixed a problem with downloading a file at a baud rate other than 19200
· Added a more detailed printer settings dialog box
· Changed the Print Dialog Box to grey out eye sense fields when journal 
  is selected
· New About Dialog Box
· Increased the maximum size for the PDF-417 barcode to 1024
· Fixed a problem where specifying an invalid file name for a cpf file
  could crash Label Vista

Features

Label Vista can select objects on the screen for editing, dragging, or
format label output.  To select an object, click on it with the left
mouse button.  The object will then be surrounded with a blue
rectangle.  The object may then be dragged with the left mouse button
held down.  It may also be edited by clicking on the right mouse button
while the mouse is inside the blue rectangle.  Multiple items may be
selected by holding down the control key on the keyboard while clicking
on the desired objects with the left mouse button.  If you want to select
multiple items, continue holding the control key as you make your
selections with the mouse.  This will add to the current list of items
selected.

The fonts creation capability enables you to create and edit pre-scaled 
(fixed size) fonts from a library of True Type fonts. These fonts can 
then be down-loaded into the printer as ".cpf" files and used to create 
labels.

Comtec Command Language format files can be made from any label by first
selecting the objects which will be variable in the format.  This is done
by using the multiple object selection method described in the previous
paragraph.  The order in which you click on the objects determines their
order in the format file.  This is important because your printer manual
specifies that the order of variable fields in the format file
determines the order in which variable data must be sent to the printer
when using the format.  To complete the format file procedure, choose
the "Save As Format" command under the File Menu.  Your label will be
saved to disk under the format file name you select.  This operation
has no effect on the label currently displayed, or the label file on
disk which represents the currently displayed label.

Users can implement snap-lines for aligning objects in the label by
using the margins of the label as set in Page Setup.  For example, to
align text with left justification on the 1" position, set the left
margin to 1" and then use the left alignment button on each text object
you want to have lined up on 1".  The same principle can be used for
vertical alignments against the top or bottom page line.  Once the
alignment is complete, you can move the margin to wherever it belongs
for your label boundary.

System Compatibility Notes:

Label Vista is a 32-bit program and requires Windows 95 or NT 4.0 or 
later.


Notes:
The following fonts do not have the Euro Currency symbol:
Andale Mono
Andy MT
Gill Sans MT Condensed
OCR B MT

In order to view the Euro Currency symbol in Windows 95 or Windows 
NT 4.0 a patch form Microsoft needs to be run.  The patch can be 
found at:
http://www.microsoft.com/windows/euro.asp

If after installing Label Vista all the fonts do not appear, run the
fonts folder from inside the control panel.  This should register
any fonts that did not get registered previously.

The manual for Label Vista is included on this CD in the \Manual
directory.  The manual is in .pdf format.  To view the manual you
need a pdf viewer.  If you do not have one installed on your
computer, we have provided Adobe Acrobat Reader on this CD.  To
install it on your computer run ar32e301.exe in the \Acrobat 
Directory.